Neutralization 

Showing 1 - 24 of 24 items
  • Very easy to usePowerful : 440 V - 22 JRugged aluminium enclosureWatertight IP67Solid stateGalvanic isolation

  • Very easy to usePowerful : 390 V - 14 JRugged aluminium enclosureWatertight IP67Solid stateEncrypted transmissionGalvanic isolationBattery life up to 6 days in sleep mode

  • ATLAS-150 RC is a radio-controlled electronic exploder, designed for remote firing of electric detonators. It is a compact equipment, especially designed for explosive method of entry and other missions requiring low firing line lengths. It consists of a control unit and 5 receiver units (paired at the factory), packaged in a foamed carrying case.

  • ATLAS-300 is an electronic capacitor exploder, very compact sized and sturdy, designed for firing electric detonators. This device is very easy to use : pressing the CH button charges the capacitors; when the capacitors are charged, the firing can be triggered by pressing simultaneously the F button. 

  • ATLAS-350 is an electronic capacitor exploder, very compact sized and sturdy, designed for firing electric detonators. This device is very easy to use : pressing the CH button charges the capacitors; when the capacitors are charged, the firing can be triggered by pressing simultaneously the F button. 

  • The ATLAS 400 (Certification INERIS EMF05MA4001) is an electronic capacitor exploder, compact and sturdy, designed for firing electric detonators. It is fitted with two fire outputs and features a builtin line continuity test. The exploder ATLAS 400 is powered by a rechargeable NiMH battery which offers a capacity of approximately 400 firings.

  • ATLAS 400 RC is an electronic remote controlled exploder, designed for firing electric detonators. It consists of one control unit and 1 to 3 receiver units. The control unit allows the remote control of the receiver units by the mean of a secured communication protocol.

  • This demolition kit consists of a complete range of devices, tools and consumables needed in ammunition destruction jobs. It is supplied in a Pelicase 1550, with specific foaming.

  • The firing lines consist of : • twisted firing cable, colour black / brown, section 2 x 0,75 mm², NSN 6145-99-017-3378 • a drum made of butyl rubber, very robust, black colour 

  • The 25 mm penetrating shaped charge ITS-2101 is in the form of a transparent cup provided at its base with three receptacles for receiving three support legs. The shaped charge consists of : 1 body, 1 cover, 1 copper cone and 3 feet.

  • The cutting shaped charge ITS 2102 (150 x 15 mm) is in the form of a transparent U-shaped vessel equipped at its base with four supporting legs. Two end blades enable the association, if necessary, of several cutting charges, placed end to end, in order to form an elongated charge. The shaped charge consists of: 1 body, 1 cover and 1 copper dihedral.

  • The cutting shaped charge ITS 2103 (150 x 20 mm) is in the form of a transparent U-shaped vessel equipped at its base with four supporting legs. Two end blades enable the association, if necessary, of several cutting charges, placed end to end, in order to form an elongated charge. The shaped charge consists of: 1 body, 1 cover and 1 copper dihedral.

  • The cutting shaped charge (150 x 25 mm) is in the form of a transparent U-shaped vessel equipped at its base with four supporting legs. Two end blades enable the association, if necessary, of several cutting charges, placed end to end, in order to form an elongated charge. The shaped charge consists of: 1 body, 1 cover and 1 copper dihedral.

  • The Ballistic Paw is a self-fill device using a non-explosive flammable liquid, classified HAZMAT Class 3, mixed with a small quantity of sensitizer immediately before use. At this point the device becomes an explosive unit. It is supplied in a rugged Peli case holding 40 devices, less detonators.

  • The Needle (Plus) is a development of ABP’s Needle Disruptor. in answer to requests from a number of our customers, ABP have developed a “leadless” cartridge and breach system which allows standard command cable to be connected in a manner common to ABP’s other disruptors such as Pigstick and Hotrod. NSN: 1377-99-232-3236

  • The Pigstick Disruptor is an established “General Purpose” disruptor suitable for disruption of devices that are contained in packages such as parcels, briefcases, etc. Pigstick has been in active service for over 25 years with many bomb disposal teams worldwide and has proven to be an extremely reliable method of disruption.

  • The Hotrod Disruptor is an established equipment for disruption of improvised Explosive Devices (IED’s) that are contained in larger or better protected devices such as those packed in large parcels, suitcases etc. It has been in active service for over 25 years with many bomb disposal teams worldwide and has been proven to be an extremely reliable method...

  • The ABL 1000 Recoilless Disruptor De-Armer has been developed as a dual role equipment to defeat the threat posed by both Improvised Explosive Devices (IEDs) and unexploded Ordnance. When used as a Disruptor the ABL 1000 equipped with the supplied disruption barrel the equipment will project a high pressure water slug into the suspect device disrupting...

  • The ABL 2000 is a general purpose Recoilless Disruptor designed to render safe iED’s found in containers such as a briefcases or similar packages. ABL 2000 has been subject to a series of formal tests against representative targets, sensitive explosives and pressure measuring systems ensuring reliable and consistent disruptive performance with complete...

  • The ABL 3000 is a “High Power” Recoilless Disruptor designed to render safe iED’s found in larger or better protected containers than those that can be tackled with a General Purpose disruptor such as ABL 2000. Recent developments provide ABL 3000 with enhanced capabilities. NSN 1385-99-930-7464

  • The main function of mine sweeping shield is to improve user’s protection against fragments moving on high speed in various mine sweeping assignments. Shield’s structure is based on high performance material that has good kinetic energy absorption properties combined in light weight. Shield can be used by two persons at the same time if necessary.

  • The Rapid Armor Shelter System (international patent pending) is a new, innovative ballistic protection system. This military certified lightweight fortification wall system is ideal for fast moving troops. Fortification walls can be built and dismantled in a few minutes allowing troops to be protected even during short stops or operations.

  • The 36 Piece Non-Magnetic Tool Kit is designed for EOD operations. All tools are manufactured from beryllium copper alloy. All tools are supplied in a transit case. Replacement tools can be provided individually.

  • The 85 Piece Non-Magnetic Tool Kit is designed for EOD operations. All tools are manufactured from beryllium copper alloy. All tools are supplied in a transit cases. Replacement tools can be provided individually

Showing 1 - 24 of 24 items