HARD WIRE ELECTRONIC EXPLODER ATLAS-400
NSN : 1375-14-562-5833
 

Electronic exploder ATLAS-400

Certification INERIS EMF05MA4001

ATLAS 400 is an electronic capacitor exploder, compact and sturdy designed for firing electric detonators.

It is fitted with two fire outputs and features a built-in line continuity test.

The exploder ATLAS 400 integrates a rechargeable NiMH battery which offers a capacity of approximately 400 firings. A bicolour led indicates continuously the charge level of the battery.

It is integrated in an aluminium sturdy and compact box, whose control panel consists of 4 buttons and 4 leds. The both firing lines are connected on safety sockets which present that the user can be in contact with dangerous voltage.

A single socket is used to charge the battery and also to connect the security key which puts the device into operation.

ATLAS 400 features many security levels :

• security key
• permanent shunt on the firing output
• battery voltage monitoring
• automatic discharge of the capacitors when the charge button is released
• permanent measurement of the capacitors voltage
• to fire, 2 buttons must be pressed simultaneously
• firing is allowed only when the capacitors are fully charged
• safety plugs
• monitoring by micro-controller
• self-test of the control panel lights

This device is supplied with his charger 220 V and a transport bag.

 

 

 

Information sheet

Slide show (French)

Electronic exploder ATLAS-400
supplied with charger and transit bag

Ordering code : 330010

 
 
ACCESSORIES FOR EXPLODER ATLAS-400
     
Clé de sécurité ATLAS-400 Safety key ATLAS-400
supplied with the standard device

Ordering code : 330011

 
     
Chargeur rapide ATLAS-400 Rapid charger for ATLAS-400
Charging time : 1 h 30 approx.
supplied with the standard device

Ordering code : 330012
 
     
Testeur ATLAS-400

Test tool for ATLAS-400
for operation test of the exploder

Ordering code : 330017

 
     
Synchronisation box for ATLAS-400
to be connected to ATLAS-400 output sockets, delivers a 5V isolated output, BNC connector, for synchronisation with measurement systems, for example.

Ordering code : 330014

 
     

Shock tube adapter for ATLAS-400
to be connected to ATLAS-400 output sockets, it generates a spark for initiation of shock tube. Tips 3mm or 4mm are available.

Ordering code : 330018